Wczytuję dane...
PRODUKT NIEDOSTĘPNY
Indeks towaru: KH-2007
Realizacja zamówienia: 24

SPECIFICATIONS Jeep Cherokee 2007

ENGINE

Description

Type

Part Number

Capacities

U.S.

Metric

Cooling System
♦ Engine Coolant (3.7L Engine) MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) 1 gallon - 05066386AA 14 Quarts 13.2 Liters
♦ Engine Coolant (2.8L Diesel Engine) MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) 1 gallon - 05066386AA 13 Quarts 12.5 Liters
Engine Oil with Filter
♦♦ Engine Oil (3.7L Gasoline Engine) MOPAR® API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. 1 quart - 04761872AC 5 Quarts 4.7 Liters
5 quarts - 04761851AD
♦♦♦ Engine Oil (2.8L Diesel Engine) Use an API Certified SAE 0W-40 engine oil, meeting the requirements of Chrysler Material Standard MS-10725. 1 quart - 05127394AA 7 Quarts 6.6 Liters
Engine Oil Filter (3.7L Engine) MOPAR® Engine Oil Filter 4781452AA or 4781452BB N/A N/A
Engine Oil Filter (2.8L Diesel Engine) MOPAR® Engine Oil Filter 5003558AA N/A N/A
Fuel (approximate)
♦♦♦♦ Fuel Selection (3.7L Gasoline Engine) Domestic 87 Octane (89 Octane should be used for trailer towing purposes). N/A 19.5 Gallons 74 Liters
Fuel Selection (3.7L Gasoline Engine) Export 91 Octane N/A 19.5 Gallons 74 Liters
Fuel Selection (2.8L Diesel Engine) Use good quality diesel fuel from a reputable supplier. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 will provide good performance.This vehicle is fully compatible with biodiesel blends up to 5% biodiesel meeting ASTM specification D-975. N/A 19.5 Gallons 74 Liters
A/C Refrigerant System
A/C Refrigerant (All Engines) R-134a 82300101AB 1.37 Pounds 0.624 Kilograms
 
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A3/B3, A3/B4 or A5/B5. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available.
♦♦♦ Use only Diesel Engine Oils confirming to API (American Petroleum Institute) Quality CH-3 or CH-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A3/B3 or A3/B4. SAE 5W-40 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 0W-40 engine oil is not available.
♦♦♦♦ DO NOT use gasolines containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components.Problems that result from using methanol/gasoline or E85 Ethanol blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Methanol.
 
CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

SPARK PLUGS

Description

Type

Part Number

Gap

U.S.

Metric
Spark Plugs (3.7L Engines) NGK® Nickel 56028356AA (ZFR6F-11G) 0.044 in 1.10 mm

TRANSMISSION

Description

Type

Part Number

Capacities

U.S.

Metric
Automatic
545RFE - Service Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 5 Quarts 4.7 Liters
1 Gallon - 05013458AA
♦ 545RFE- Overhaul Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 14 Quarts 13.3 Liters
1 Gallon - 05013458AA
42RLE - Service Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 4.0 Quarts 3.8 Liters
1 Gallon - 05013458AA
♦ 42RLE- Overhaul Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 8.8 Quarts 8.3 Liters
1 Gallon - 05013458AA
Manual
♦ NSG370 Manual Transmission MOPAR® Manual Transmission Lubricant or equivalent (meeting the requirements of Chrysler Material Standard MS-9224)d 1 Quart - 04874464 1.6 Quarts 1.5 Liters
 
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.
CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

TRANSFER CASE

Description

Type

Part Number

Capacities

U.S.

Metric
♦ NV231 MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 2.95 Pints 1.4 Liters
1 Gallon - 05013458AA
♦ NV241 GEN II MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 4.2 Pints 2.0 Liters
1 Gallon - 05013458AA
♦ NV242 MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 3.4 Pints 1.6 Liters
1 Gallon - 05013458AA
 
♦ Approximate dry fill or fill to bottom edge of fill plug hole.
CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

CHASSIS

Description

Type

Part Number

Capacities

U.S.

Metric
Front Axle
186 FIA (Model 30) MOPAR® Gear & Axle Lubricant (SAE 80W-90) or equivalent. 1 Quart - 04874468 2.5 Pints 1.2 Liters
Rear Axle
8.25 Rear Axle MOPAR® Synthetic Gear Lubricant (SAE 75W-90) or equivalent. For trailer towing, the lubricant should be replaced with Mopar® Synthetic Gear AND Axle Lubricant (SAE 75W-140) or equivalent. 1 Quart - 05010320AA (SAE 75W-90) 3.4 Pints 1.6 Liters
1 Quart - 04874469 (SAE 75W-140)
♦ Brake Master Cylinder MOPAR® Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
♦♦ Power Steering Reservoir MOPAR® Power Steering Fluid +4 1 Quart - 05013457AA N/A N/A
 
♦ If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (P/N 04549625AC), is acceptable.
♦♦ If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (P/N 05166226AA), is acceptable.
CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

 

DANE DO USTAWIENIA GEOMERTII KÓŁ

FRONT

DESCRIPTION

SPECIFICATION
PREFERRED CASTER
3.9° ± 0.5°		 CAMBER
-0.375° ± 0.375°		 TOTAL TOE-IN
.2° ± 0.125°
RANGE 3.4° to + 4.4° –0.750° to 0° +0.075° to +0.325°
MAX RT/LT DIFFERENCE 0.5° 0.7° 0.13°

REAR

DESCRIPTION

SPECIFICATION
PREFERRED CAMBER
–.25°± .375°		 THRUST ANGLE
0° to ± 0.25°		 TOTAL TOE-IN
.25° to ± .41°
RANGE –.625° to .125° –.25° to +.25° –.16° to .66°