SPECIFICATIONS Jeep Cherokee 2014
ENGINE
| Description | Type | Capacities | Part Number | Global Part Number | |||
|---|---|---|---|---|---|---|---|
| U.S. | Metric | ||||||
| Cooling System | |||||||
| ♦ Engine Coolant (2.4L Engine) | MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Material Standard MS-12106 | 7.2 Quarts | 6.8 Liters | 68163848AB | 68163848GB | ||
| ♦ Engine Coolant (3.2L Engine) | MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Material Standard MS-12106 | 10 Quarts | 9.5 Liters | 68163848AB | 68163848GB | ||
| ♦ Engine Coolant (2.0L Diesel Engine) | We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). | 7.2 Quarts | 6.8 Liters | 68163848AB | 68163848GB | ||
| Engine Oil with Filter | |||||||
| ♦♦ Engine Oil – Non ACEA Categories (2.4L Engine) | We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the requirements of Material Standard MS-6395 or Fiat 9.55535– CR1. Refer to your engine oil filler cap for correct SAE grade. | 5.5 Quarts | 5.2 Liters | 68218950AB | 68218950GA | ||
| ♦♦ Engine Oil – ACEA Categories (2.4L Engine) | For countries that use ACEA European Oil Categories for Service Fill Oils, we recommend you use 0W-20 engine oils meeting the requirements of ACEA C3, and approved to MS-6395 or Fiat 9.55535–CR1. | 5.5 Quarts | 5.2 Liters | 68218950AB | 68218950GA | ||
| ♦♦♦ Engine Oil – Non ACEA Categories (3.2L Engine) | We recommend you use SAE 5W-20 API Certified Engine Oil, meeting the requirements of Material Standard MS-6395 or Fiat 9.55535– CR1. Refer to your engine oil filler cap for correct SAE grade. | 6.0 Quarts | 5.6 Liters | 68218890AB | 68218890GB | ||
| ♦♦♦ Engine Oil – ACEA Categories(3.2L Engine) | For countries that use ACEA European Oil Categories for Service Fill Oils, we recommend you use 5W-20 engine oils meeting the requirements of ACEA C3, and approved to MS-6395 or Fiat 9.55535–CR1. | 6.0 Quarts | 5.6 Liters | 68218890AB | 68218890GB | ||
| Engine Oil (2.0L Diesel Engine) | For best performance and maximum protection under all types of operating conditions, the manufacturer recommends Fully Synthetic Low Ash 0W-30 engine oils that meet the requirements of ACEA C2 such as MOPAR®, Pennzoil®, Shell Helix ®, classification 9.55535–DS1 or equivalent. If Fully Synthetic Low Ash 0W-30 engine oil is not available, Fully Synthetic Low Ash 5W-30 engine oils that meet the requirements of ACEA C2 such as MOPAR®, Pennzoil®, Shell Helix® or equivalent may be used. NOTE: If lubricants with the prescribed specifications are not available, products with the minimum indicated ACEA performance can be used for topping up; in this case optimal performance of the engine is not guaranteed. | 4.3 Quarts | 4.1 Liters | N/A | 68291576GA | ||
| Engine Oil Filter (2.0L Diesel Engine) | MOPAR® Engine Oil Filter | N/A | N/A | — | — | ||
| Engine Oil Filter (2.4L Engine) | MOPAR® Engine Oil Filter | N/A | N/A | — | — | ||
| Engine Oil Filter (3.2L Engine) | MOPAR® Engine Oil Filter | N/A | N/A | — | — | ||
| Fuel (approximate) | |||||||
| Fuel Selection (2.4L Engine) | 87 Octane Unleaded (R+M/2) | 15.8 Gallons | 60.0 Liters | — | — | ||
| 91 Research Octane Number (RON) | — | — | |||||
| Fuel Selection (3.2L Engines) | 87–89 Octane Unleaded (R+M/2) | 15.8 Gallons | 60.0 Liters | — | — | ||
| 91-93 Research Octane Number (RON) | — | — | |||||
| Fuel Selection (2.0L Diesel Engines) | Specification EN590 | 15.8 Gallons | 60.0 Liters | — | — | ||
| A/C Refrigerant System | |||||||
| Refrigerant | R-1234yf (Gas Engines) | 1.06 Pounds | 0..482 Kilograms | 68224028AB | 68224028GA | ||
| Refrigerant | R-1234yf (Diesel Engines) | 1.12 Pounds | 0.510 Kilograms | ||||
| Refrigerant | R-134a | 1.19 Pounds | .539 Kilograms | 82300101AC | 82300101GB | ||
| ♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level. | |||||||
| ♦♦ SAE 5W-20 engine oil approved to MS-6395 or Fiat 9.55535–CR1 may be used when SAE 0W-20 engine oil is not available. Please ensure that you switch back to 0W-20 for the next oil change, as indicated by your vehicles automatic oil change indicator. | |||||||
| ♦♦♦ SAE 5W-30 engine oil approved to MS-6395 or Fiat 9.55535–CR1 may be used when SAE 5W-20 engine oil is not available. | |||||||
|
|||||||
SPARK PLUGS
| Description | Gap | |
|---|---|---|
| U.S. | Metric | |
| Spark Plugs (2.4L Engine) | 0.047 in | 1.20 mm |
| Spark Plugs (3.2L Engine) | 0.043 in | 1.10 mm |
TRANSAXLE
| Description | Type | Capacity | Part Number | Global Part Number |
|---|---|---|---|---|
| 948TE Automatic Transaxle | Use only MOPAR® ZF 8&9 Speed ATF™Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. | 6.0 L (6.35 Quarts) | 68218925AA | 68218925GA |
| C635 Manual Transaxle | We recommend you use MOPAR® C635 DDCT/MTX Transmission Fluid. | 1.7 Liter (1.8 Quarts) | 68092630AA | 68092630GA |
CHASSIS
| Description | Type | Capacities | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| U.S. | Metric | ||||
| ♦ Brake Master Cylinder | MOPAR® Brake Fluid DOT 3, SAE J1703. | N/A | N/A | 68218041AA | 68218041GA |
| Rear Differential | 70W-80 Gear Lube | One Speed - 0.94 Quarts Two Speed - 1.22 Quarts Two-Speed With Locker - 1.3 Quarts | One Speed - 0.89 Liters Two Speed - 1.15 Liters Two-Speed With Locker - 1.23 Liters | 68227765AA | — |
| Synthetic Hydraulic Control Fluid | 0.46 Quarts | 0.439 Liters | 68227766AA | — | |
| One Speed PTU | 75W-90 Gear Lube | 0.74 Quarts | 0.70 Liters | 68218655AA | 68218655GA |
| Two Speed PTU | 75W-90 Gear Lube | 1.06 Quarts | 01.20 Liters | 68218655AA | 68218655GA |
| ♦ If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 is acceptable. | |||||
DANE DO USTAWIENIA GEOMERTII KÓŁ
SET-TO SPECIFICATIONS
|
Front Wheel Alignment Specifications |
|||||
|---|---|---|---|---|---|
|
Total Toe** |
Caster* |
Cross Caster* |
Camber* |
Cross Camber* |
|
|
Vehicles Built Between 2018 MY and 09/16/2013 |
|||||
|
FWD |
0.10° +/- 0.15° |
4.01° +/- 0.45° |
0.00° +/- 0.50° |
-0.54° +/- 0.40° |
0.00° +/- 0.50° |
|
AWD |
0.10° +/- 0.15° |
4.26° +/- 0.45° |
0.00° +/- 0.50° |
-0.54° +/- 0.40° |
0.00° +/- 0.50° |
|
TRAILHAWK |
0.10° +/- 0.15° |
4.28° +/- 0.45° |
0.00° +/- 0.50° |
-0.45° +/- 0.40° |
0.00° +/- 0.50° |
|
Vehicles Built Before 09/16/2013 |
|||||
|
FWD |
0.10° +/- 0.15° |
3.51° +/- 0.45° |
0.00° +/- 0.50° |
-0.54° +/- 0.40° |
0.00° +/- 0.50° |
|
AWD |
0.10° +/- 0.15° |
3.83° +/- 0.45° |
0.00° +/- 0.50° |
-0.54° +/- 0.40° |
0.00° +/- 0.50° |
|
TRAILHAWK |
0.10° +/- 0.15° |
4.13° +/- 0.45° |
0.00° +/- 0.50° |
-0.45° +/- 0.40° |
0.00° +/- 0.50° |
|
Notes: |
|||||
|
* For reference only. These are nonadjustable angles. |
|||||
|
** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
|||||
|
Positive toe (+) is toe-in and negative toe (−) is Toe-out. |
|||||
|
Rear Wheel Alignment Specifications |
|||||
|---|---|---|---|---|---|
|
Toe |
Total Toe** |
Thrust Angle |
Camber |
Cross Camber |
|
|
FWD |
0.00° +/- 0.10° |
0.00° +/- 0.15° |
0.00° +/- 0.10° |
-0.99° +/- 0.40° |
0.00° +/- 0.40° |
|
AWD |
0.00° +/- 0.10° |
0.00° +/- 0.15° |
0.00° +/- 0.10° |
-0.99° +/- 0.40° |
0.00° +/- 0.40° |
|
TRAILHAWK |
0.00° +/- 0.10° |
0.00° +/- 0.15° |
0.00° +/- 0.10° |
-1.03° +/- 0.40° |
0.00° +/- 0.40° |
|
Notes: |
|||||
|
* For reference only. These are nonadjustable angles. |
|||||
|
** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
|||||
|
Positive toe (+) is toe-in and negative toe (−) is Toe-out. |
|||||
MEASUREMENT SPECIFICATIONS
|
Front Wheel Alignment Specifications |
|||||
|---|---|---|---|---|---|
|
Total Toe** |
Caster* |
Cross Caster* |
Camber* |
Cross Camber* |
|
|
Vehicles Built 09/16/2013 and After |
|||||
|
FWD |
0.10° +/- 0.20° |
4.01° +/- 0.45° |
0.00° +/- 0.50° |
-0.54° +/- 0.40° |
0.00° +/- 0.50° |
|
AWD |
0.10° +/- 0.20° |
4.26° +/- 0.45° |
0.00° +/- 0.50° |
-0.54° +/- 0.40° |
0.00° +/- 0.50° |
|
TRAILHAWK |
0.10° +/- 0.20° |
4.28° +/- 0.45° |
0.00° +/- 0.50° |
-0.45° +/- 0.40° |
0.00° +/- 0.50° |
|
Vehicles Built Before 09/16/2013 |
|||||
|
FWD |
0.10° +/- 0.20° |
3.51° +/- 0.45° |
0.00° +/- 0.50° |
-0.54° +/- 0.40° |
0.00° +/- 0.50° |
|
AWD |
0.10° +/- 0.20° |
3.83° +/- 0.45° |
0.00° +/- 0.50° |
-0.54° +/- 0.40° |
0.00° +/- 0.50° |
|
TRAILHAWK |
0.10° +/- 0.20° |
4.13° +/- 0.45° |
0.00° +/- 0.50° |
-0.45° +/- 0.40° |
0.00° +/- 0.50° |
|
Notes: |
|||||
|
* For reference only. These are nonadjustable angles. |
|||||
|
** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
|||||
|
Positive toe (+) is toe-in and negative toe (−) is Toe-out. |
|||||
|
Rear Wheel Alignment Specifications |
|||||
|---|---|---|---|---|---|
|
Toe |
Total Toe** |
Thrust Angle |
Camber |
Cross Camber |
|
|
FWD |
0.00° +/- 0.12° |
0.00° +/- 0.15° |
0.00° +/- 0.10° |
-0.99° +/- 0.40° |
0.00° +/- 0.40° |
|
AWD |
0.00° +/- 0.12° |
0.00° +/- 0.15° |
0.00° +/- 0.10° |
-0.99° +/- 0.40° |
0.00° +/- 0.40° |
|
TRAILHAWK |
0.00° +/- 0.12° |
0.00° +/- 0.15° |
0.00° +/- 0.10° |
-1.03° +/- 0.40° |
0.00° +/- 0.40° |
|
Notes: |
|||||
|
* For reference only. These are nonadjustable angles. |
|||||
|
** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
|||||
|
Positive toe (+) is toe-in and negative toe (−) is Toe-out. |
|||||