SPECIFICATIONS Jeep Compass 2023
2.0L Engine
Description |
Capacities |
Type |
Part Number |
Global Part Number |
||
---|---|---|---|---|---|---|
Engine Oil With Filter |
5 Quarts / 4.73 Liters |
We recommend you use Mopar API SN PLUS Certified SAE 5W-30 Full Synthetic Engine Oil which meets the requirements of FCA Material Standard MS-13340. If SN PLUS or equivalent oil is unavailable then use SAE 0W-30 ACEA C2/API SN Full Synthetic Engine Oil which meets the requirements of FCA Material Standard 9.55535–GS, such as SELENIA DIGITEK.
|
05166241PA |
05166241GA |
||
Cooling System * |
9 Quarts / 8.6 Liters |
We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. |
68163848AB |
68163848GB |
||
Fuel Selection |
13.5 Gallons / 51 Liters |
87 Octane (R+M)/2 Method, 0-15% ethanol. |
— |
— |
||
Spark Plugs |
GAP |
We recommend you use MOPAR Spark Plugs. |
— |
— |
||
0.024 – 0.025 in / 0.60 – 0.65 mm |
||||||
* Includes heater and coolant reservoir filled to MAX level. |
A/C Refrigerant System
Description |
Charge Amounts |
Type |
Part Number |
Global Part Number |
---|---|---|---|---|
A/C System 1234yf |
Refrigerant 1.0 lb / 454 g |
Use only refrigerant 1234yf |
68224028AB |
68224028GA |
Compressor Oil 90 ml (3.0 fl oz) |
Use Only PAG Oil ND12: |
68224150AB |
68224150GB |
Transmission
Description |
Capacities |
Type |
Part Number |
Global Part Number |
---|---|---|---|---|
8F30 Automatic Transmission Oil Capacity |
Non Trailhawk — 8.25 Liters / 8.71 Quarts Trailhawk — 8.1 Liters / 8.56 Quarts |
S:P–4M |
68171866AB |
— |
Transfer Case
Description |
Capacities |
Type |
Part Number |
Global Part Number |
---|---|---|---|---|
Power Transfer Unit (PTU) – If Equipped |
0.42 Quarts / 0.4 Liters |
Mopar Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90 (API GL-5) |
68280932AA |
— |
Chassis Systems
Description |
Capacities |
Type |
Part Number |
Global Part Number |
---|---|---|---|---|
Rear Differential (RDM) – If Equipped |
0.63 Quarts / 0.6 Liters |
Mopar Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90 (API GL-5) |
68280933AA |
— |
Brake Master Cylinder |
N/A |
We recommend you use MOPAR DOT 4. If DOT 4 brake fluid is not available, then DOT 3 is acceptable. |
04549625AD |
04549625GD |
SET-TO SPECIFICATIONS
All specifications are given in degrees. |
All wheel alignments are to be set with the vehicle at curb height |
With service there is both a set-to and service measurement check specifications. Set-to specifications are the parameters and tolerances used when adjusting alignment is necessary. A measurement specification is for the initial measurement of a vehicle in service. If this vehicle does not pass the measurement specification then the alignment should be adjusted to the set-to specification. Measurement specification is due to variation from measurement tools and setting. |
Front Wheel Alignment Specifications |
|||||||
---|---|---|---|---|---|---|---|
Tire Size |
Total Toe** |
Caster - Left |
Caster - Right |
Cross Caster* |
Individual Camber |
Cross Camber |
|
FWD |
16 → 19 inch |
-0.16° +/- 0.13° |
5.24° +/- 0.50° |
5.24° +/- 0.50° |
0.00° +/- 0.50° |
-0.40° +/- 0.50° |
0.00° +/- 0.50° |
AWD Base |
17 → 19 inch |
-0.16° +/- 0.13° |
4.86° +/- 0.50° |
4.86° +/- 0.50° |
0.00° +/- 0.50° |
-0.70° +/- 0.50° |
0.00° +/- 0.50° |
AWD Pedpro |
17 inch |
-0.16° +/- 0.13° |
4.81° +/- 0.50° |
4.81° +/- 0.50° |
0.00° +/- 0.50° |
-0.45° +/- 0.50° |
0.00° +/- 0.50° |
AWD Trailhawk |
17 inch |
-0.16° +/- 0.13° |
4.86° +/- 0.50° |
4.86° +/- 0.50° |
0.00° +/- 0.50° |
-0.52° +/- 0.50° |
0.00° +/- 0.50° |
* For reference only. These are nonadjustable angles. |
|||||||
** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
|||||||
Positive toe (+) is toe-in and negative toe (-) is Toe-out. |
AWD Pedpro refers to vehicles equipped with pedestrian protection. |
Rear Wheel Alignment Specifications |
||||||
---|---|---|---|---|---|---|
Tire Size |
Individual Toe |
Total Toe** |
Thrust |
Individual Camber |
Cross Camber |
|
FWD |
16 → 19 inch |
0.10° +/- 0.06° |
0.20° +/- 0.13° |
0.00° +/- 0.10° |
-1.10° +/- 0.50° |
0.00° +/- 0.50° |
AWD Base |
17 → 19 inch |
0.10° +/- 0.06° |
0.20° +/- 0.13° |
0.00° +/- 0.10° |
-1.12° +/- 0.50° |
0.00° +/- 0.50° |
AWD Pedpro |
17 inch |
0.10° +/- 0.06° |
0.20° +/- 0.13° |
0.00° +/- 0.10° |
-0.91° +/- 0.50° |
0.00° +/- 0.50° |
AWD Trailhawk |
17 inch |
0.10° +/- 0.06° |
0.20° +/- 0.13° |
0.00° +/- 0.10° |
-0.82° +/- 0.50° |
0.00° +/- 0.50° |
** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
||||||
Positive toe (+) is toe-in and negative toe (-) is Toe-out. |
AWD Pedpro refers to vehicles equipped with pedestrian protection. |
MEASUREMENT SPECIFICATIONS
All specifications are given in degrees. |
All wheel alignments are to be set with the vehicle at curb height . |
Use service measurement check specifications when doing initial alignment check in service. Service measurement check specifications should be used to determine if the vehicle is out of desired alignment specifications. If a vehicle's measurements are found to be outside of the service measurement check specifications, then it should be aligned using the set-to specifications. No development testing to be done with service measurement check specifications. |
Front Wheel Alignment Specifications |
|||||||
---|---|---|---|---|---|---|---|
Tire Size |
Total Toe** |
Caster - Left |
Caster - Right |
Cross Caster* |
Individual Camber |
Cross Camber |
|
FWD |
16 → 19 inch |
-0.16° +/- 0.20° |
5.24° +/- 0.50° |
5.24° +/- 0.50° |
0.00° +/- 0.50° |
-0.40° +/- 0.50° |
0.00° +/- 0.50° |
AWD Base |
17 → 19 inch |
-0.16° +/- 0.20° |
4.86° +/- 0.50° |
4.86° +/- 0.50° |
0.00° +/- 0.50° |
-0.70° +/- 0.50° |
0.00° +/- 0.50° |
AWD Pedpro |
17 inch |
-0.16° +/- 0.20° |
4.81° +/- 0.50° |
4.81° +/- 0.50° |
0.00° +/- 0.50° |
-0.45° +/- 0.50° |
0.00° +/- 0.50° |
AWD Trailhawk |
17 inch |
-0.16° +/- 0.20° |
4.86° +/- 0.50° |
4.86° +/- 0.50° |
0.00° +/- 0.50° |
-0.52° +/- 0.50° |
0.00° +/- 0.50° |
* For reference only. These are nonadjustable angles. |
|||||||
** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
|||||||
Positive toe (+) is toe-in and negative toe (-) is Toe-out. |
AWD Pedpro refers to vehicles equipped with pedestrian protection. |
Rear Wheel Alignment Specifications |
||||||
---|---|---|---|---|---|---|
Tire Size |
Individual Toe |
Total Toe** |
Thrust |
Individual Camber |
Cross Camber |
|
FWD |
16 → 19 inch |
0.10° +/- 0.06° |
0.20° +/- 0.13° |
0.00° +/- 0.10° |
-1.10° +/- 0.50° |
0.00° +/- 0.50° |
AWD Base |
17 → 19 inch |
0.10° +/- 0.06° |
0.20° +/- 0.13° |
0.00° +/- 0.10° |
-1.12° +/- 0.50° |
0.00° +/- 0.50° |
AWD Pedpro |
17 inch |
0.10° +/- 0.06° |
0.20° +/- 0.13° |
0.00° +/- 0.10° |
-0.91° +/- 0.50° |
0.00° +/- 0.50° |
AWD Trailhawk |
17 inch |
0.10° +/- 0.06° |
0.20° +/- 0.13° |
0.00° +/- 0.10° |
-0.82° +/- 0.50° |
0.00° +/- 0.50° |
** TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
||||||
Positive toe (+) is toe-in and negative toe (-) is Toe-out. |
AWD Pedpro refers to vehicles equipped with pedestrian protection. |
xxx