PRODUKT NIEDOSTĘPNY
SPECIFICATIONS Dodge Nitro 2011
ENGINE
| Description | Type | Part Number | Capacities | |||
|---|---|---|---|---|---|---|
| U.S. | Metric | |||||
| Cooling System | ||||||
| ♦ Engine Coolant (3.7L and 4.0L Engines) | MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) | 1 Gallon - 05066386AA | 14 Quarts | 13.2 Liters | ||
| Engine Oil with Filter | ||||||
| ♦♦/♦♦♦ Engine Oil (3.7L Engine) Domestic and Export Non ACEA | MOPAR® API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. | 1 Quart - 04761872AC | 5 Quarts | 4.7 Liters | ||
| 5 Quarts - 04761851AD | ||||||
| ♦♦♦ Engine Oil (4.0L Engine) Domestic and Export Non ACEA | MOPAR® API Certified SAE10W-30 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. | 1 Quart - 04761839AC | 5.5 Quarts | 5.2 Liters | ||
| 5 Quarts - 04761845AD | ||||||
| Engine Oil Filter (3.7L Engine) | MOPAR® Engine Oil Filter | 05184231AA | N/A | N/A | ||
| Engine Oil Filter (4.0L Engine) | MOPAR® Engine Oil Filter | 04884899AB | N/A | N/A | ||
| Fuel (approximate) | ||||||
| Fuel Selection (3.7L Engine) Domestic | 87 Octane, (R + M)/2 method | N/A | 19.5 Gallons | 73.8 Liters | ||
| Fuel Selection (3.7L Engine) Export | 91 Octane | N/A | 19.5 Gallons | 73.8 Liters | ||
| Fuel Selection (4.0L Engine) Domestic | 87 Octane Acceptable - 89 Octane Recommended | N/A | 19.5 Gallons | 73.8 Liters | ||
| Fuel Selection (4.0L Engine) Export | 91 Octane Acceptable - 95 Octane Recommended | N/A | 19.5 Gallons | 73.8 Liters | ||
| A/C Refrigerant System | ||||||
| A/C Refrigerant (Single) | R-134a | 82300101AB | 1.12 Pounds | 0.510 Kilograms | ||
| ♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level. | ||||||
| ♦♦ SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available. | ||||||
| ♦♦♦ For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. Refer to your engine oil filler cap for correct SAE grade. | ||||||
|
||||||
SPARK PLUGS
| Description | Type | Part Number | Gap | |
|---|---|---|---|---|
| U.S. | Metric | |||
| Spark Plugs (3.7L Engine) | NGK® Nickel Spark Plug | 56028356AA (ZFR6F-11G) | 0.044 in | 1.10 mm |
| Spark Plugs (4.0L Engine) | NGK® Single Platinum Spark Plug | 04606591AB (ZFR5LP13G) | 0.051 in | 1.30 mm |
TRANSMISSION
| Description | Type | Part Number | Capacities | |||
|---|---|---|---|---|---|---|
| U.S. | Metric | |||||
| Automatic | ||||||
| 42RLE - Service Fill | MOPAR® ATF+4 Automatic Transmission Fluid | 1 Quart - 05013457AA | 4.0 Quarts | 3.8 Liters | ||
| 1 Gallon - 05013458AA | ||||||
| ♦ 42RLE- Overhaul Fill | MOPAR® ATF+4 Automatic Transmission Fluid | 1 Quart - 05013457AA | 8.8 Quarts | 8.3 Liters | ||
| 1 Gallon - 05013458AA | ||||||
| NAG 1 - Service Fill | MOPAR® ATF+4 Automatic Transmission Fluid | 1 Quart - 05013457AA | 5.3 Quarts | 5.0 Liters | ||
| 1 Gallon - 05013458AA | ||||||
| ♦ NAG 1 - Overhaul Fill | MOPAR® ATF+4 Automatic Transmission Fluid | 1 Quart - 05013457AA | 8.1 Quarts | 7.7 Liters | ||
| 1 Gallon - 05013458AA | ||||||
| Manual | ||||||
| ♦♦ NSG370 | MOPAR® Manual Transmission Lubricant | 04874464 | 1.6 Quarts | 1.5 Liters | ||
| ♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures. | ||||||
| ♦♦ Approximate dry fill or fill to bottom edge of fill plug hole. | ||||||
|
||||||
TRANSFER CASE
| Description | Type | Part Number | Capacities | |||
|---|---|---|---|---|---|---|
| U.S. | Metric | |||||
| ♦ MP140 | MOPAR® ATF+4 Automatic Transmission Fluid | 1 Quart - 05013457AA | 1.8 Pints | 0.85 Liters | ||
| 1 Gallon - 05013458AA | ||||||
| ♦ MP143 | MOPAR® ATF+4 Automatic Transmission Fluid | 1 Quart - 05013457AA | 1.8 Pints | 0.85 Liters | ||
| 1 Gallon - 05013458AA | ||||||
| ♦ Approximate dry fill or fill to bottom edge of fill plug hole. | ||||||
|
||||||
CHASSIS
| Description | Type | Part Number | Capacities | |||
|---|---|---|---|---|---|---|
| U.S. | Metric | |||||
| Axles (Front) | ||||||
| 186 FIA - Front Axle | MOPAR® Gear & axle Lubricant SAE 80W-90 | 1 Quart - 04874468 | 2.6 Pints | 1.24 Liters | ||
| Axles (Rear) | ||||||
| 8.25 Rear Axle | MOPAR® Synthetic Gear Lubricant, SAE 75W-140 | 1 Quart - 04874469 | 4.4 Pints | 2.08 Liters | ||
| Chassis Systems | ||||||
| ♦♦ Brake Master Cylinder | MOPAR® Brake Fluid DOT 3, SAE J1703. | 12 oz. Bottle - 04318080AB | N/A | N/A | ||
| 32 oz. Bottle - 04318081AB | ||||||
| ♦♦ Clutch Master Cylinder | MOPAR® Brake Fluid DOT 3, SAE J1703. | 12 oz. Bottle - 04318080AB | N/A | N/A | ||
| 32 oz. Bottle - 04318081AB | ||||||
| ♦♦♦ Power Steering Reservoir | MOPAR® Power Steering Fluid +4 | 16 oz. Bottle - 05166226AA | N/A | N/A | ||
| ♦ Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPAR® Limited Slip Additive. | ||||||
| ♦♦ If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (04549625AC), is acceptable. | ||||||
| ♦♦♦ If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (05013457AA), is acceptable. | ||||||
|
||||||
DANE DO USTAWIENIA GEOMERTII KÓŁ
| NOTE: |
Specifications are in degrees. |
FRONT
|
FRONT WHEEL ALIGNMENT |
PREFERRED SETTING |
ACCEPTABLE RANGE |
|---|---|---|
|
CAMBER - RT/LT |
-0.375° |
–0.750° to 0° |
|
MAX RT/LT DIFFERENCE |
0.7° |
0.7° |
|
CASTER -- RT/LT |
3.3° |
2.8° to 3.8° |
|
MAX RT/LT DIFFERENCE |
0.5° |
0.5° |
|
TOE - TOTAL* |
0.2° |
+0.075° to +0.325° |
|
Positive toe (+) is toe-in and negative toe (−) is Toe-out. |
||
|
* TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
||
REAR
|
REAR WHEEL ALIGNMENT |
PREFERRED SETTING |
ACCEPTABLE RANGE |
|---|---|---|
|
CAMBER |
–0.25° |
–0.625° to +0.125° |
|
TOE - TOTAL* |
0.25° |
–0.16° to +0.66° |
|
THRUST ANGLE |
0.00° |
–0.25° to +0.25° |
|
Positive toe (+) is toe-in and negative toe (−) is Toe-out. |
||
|
* TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. |
||