PRODUKT NIEDOSTĘPNY
SPECIFICATIONS Dodge Viper 2008
ENGINE
Description |
Type |
Part Number |
Capacities | |||
---|---|---|---|---|---|---|
U.S. |
Metric | |||||
Cooling System | ||||||
♦ Engine Coolant (8.4L Engine) | MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) | 1 Gallon - 05066386AA | 16 Quarts | 15 Liters | ||
Engine Oil with Filter | ||||||
Engine Oil (8.4L Engine | For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF, and meet the requirements of Chrysler Material Standard MS-10725. The manufacturer recommends the use of a full synthetic engine oil, such as Pennzoil Platinum® European Formula SAE 5W-40 or equivalent. For additional information, refer to the “Engine Oil Selection” and “Engine Oil Viscosity (SAE Grade)” in the “Maintenance Procedures” section of this manual. | 1 Quart - 05127394AB | 11.0 Quarts | 10.4 Liters | ||
Engine Oil Filter | MOPAR® Engine Oil Filter | 05037836AA | N/A | N/A | ||
Fuel (approximate) | ||||||
Fuel Selection | 91 Octane Unleaded Fuel or higher | N/A | 16 Gallons | 60.6 Liters | ||
A/C Refrigerant System | ||||||
Refrigerant | R-134a | 82300101AB | 1.00 Pounds | 0.454 Kilograms | ||
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level. | ||||||
|
SPARK PLUGS
Description |
Type |
Part Number |
Gap | |
---|---|---|---|---|
U.S. |
Metric | |||
Spark Plugs (8.4L Engine) | Champion® Single Platinum | 05149164AA (RE10PMC5) | 0.050 in | 01.27 mm |
TRANSMISSION
Description |
Type |
Part Number |
Capacities | |||
---|---|---|---|---|---|---|
U.S. |
Metric | |||||
Manual | ||||||
TREMIC | MOPAR® ATF+4 Automatic Transmission Fluid | 1 Quart - 05013457AA | 8.24 Quarts | 3.9 Liters | ||
1 Gallon - 05013458AA | ||||||
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures. | ||||||
|
CHASSIS
Description |
Type |
Part Number |
Capacities | |||
---|---|---|---|---|---|---|
U.S. |
Metric | |||||
Axle | ||||||
♦ 266 RIA | MOPAR® Synthetic Gear Lubricant SAE 75W-140 | 1 Quart - 04874469 | 1.4 Quarts | 1.3 Liters | ||
Chassis Systems | ||||||
♦♦ Brake Master Cylinder | MOPAR® Brake Fluid DOT 3, SAE J1703. | 12 oz. Bottle - 04318080AB | N/A | N/A | ||
32 oz. Bottle - 04318081AB | ||||||
♦♦♦ Power Steering Reservoir | MOPAR® Power Steering Fluid +4 | 1 Quart - 05013457AA | N/A | N/A | ||
♦ Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPAR® Limited Slip Additive. | ||||||
♦♦ If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (P/N 04549625AC), is acceptable. | ||||||
♦♦♦ If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (P/N 05166226AA), is acceptable. | ||||||
|