Wczytuję dane...
Indeks towaru: JT-2022
Realizacja zamówienia: 24

SPECIFICATIONS Jeep Gladiator 2022

 

3.0L Engine

Description

Capacities

Type

Part Number

Global Part Number

Engine Oil With Filter

9 Quarts / 8.5 Liters

We recommend you use 5W-40 synthetic engine oil such as Mopar that meets FCA Material Standard MS-12991 and the API SN engine oil category is required.

68231020AA

68231020GA

Cooling System *

Engine: 14.5 Quarts / 13.7 Liters

We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032.

68163848AB

68163848GB

Fuel Selection

19.0 Gallons / 72.0 Liters

Use good quality diesel fuel from a reputable supplier in your vehicle. Federal law requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, Number 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. We recommend you use a blend of up to 5% biodiesel, meeting ASTM specification D-975 with your diesel engine. This vehicle is compatible with biodiesel blends greater than 5% but no greater than 20% biodiesel meeting ASTM specification D-7467 provided the shortened maintenance intervals are followed as directed.

-

-

AdBlue® Fluid Tank

5.1 Gallons / 19.3 Liters

AdBlue® (Urea-Water Solution) According To DIN 70 070 and ISO 22241-1.

-

-

Diesel Exhaust Fluid (DEF)

5.1 Gallons / 19.3 Liters

Mopar Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that has been API Certified to the ISO 22241 standard. Use of fluids not API Certified to ISO 22241 may result in system damage.

68035704AC

-

 

* Includes heater and coolant reservoir filled to MAX level.



If the vehicle is exposed to extreme cold (below 20°F or -7°C), or is required to operate at colder-than-normal conditions for prolonged periods, use climatized Number 2 diesel fuel or dilute the Number 2 diesel fuel with 50% Number 1 diesel fuel. This will provide better protection from fuel gelling or wax-plugging of the fuel filters.

 

 

3.6L Engine

Description

Capacities

Type

Part Number

Global Part Number

Engine Oil With Filter

5 Quarts / 4.7 Liters

We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade.

68218950AB

68218950GA

Cooling System *

13.0 Quarts / 12.3 Liters

We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032.

68163848AB

68218041GA

Fuel Selection

22 Gallons / 83 Liters

87 Octane (R+M)/2 Method, 0-15% Ethanol.

Spark Plugs

GAP

We recommend you use MOPAR Spark Plugs.

0.043 in / 1.1 mm

* Includes heater and coolant reservoir filled to MAX level.

 

 

A/C Refrigerant System

Description

Charge Amounts

Type

Part Number

Global Part Number

Refrigerant

1.06 Pounds / 482 Grams

Use only refrigerant R-1234yf

68224028AA

68224028GA

Refrigerant Oil

FD46XG

05114554AC

05114554GC

Refrigerant Oil

5.0 oz / 150 ml

Total System Fill

Refrigerant Oil

2.0 oz / 60 ml

A/C Condenser

Refrigerant Oil

2.0 oz / 60 ml

A/C Evaporator

Refrigerant Oil

1.0 oz / 30 ml

A/C Receiver/Dryer

 

 

TRANSMISSION

Description

Capacities

Type

Part Number

Global Part Number

Automatic

♦8HP50

9.5 Quarts/ 9 Liters

Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission.

68218925AA

68218925GA

Manual

♦♦AL6

4.76 Pints/2.25 Liters

We recommend you use Mopar ATF+4 Automatic Transmission Fluid.

68218057AB

68218057GC

♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.

♦♦ Approximate dry fill or fill to bottom edge of fill plug hole.

CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

 

 

TRANSFER CASE

Description

Capacities

Type

Part Number

Global Part Number

♦ MP1622/MP1622-OR

3.38 Pints/1.6 Liters

We recommend you use Mopar ATF+4 Automatic Transmission Fluid.

68218057AB

68218057GB

♦ MP3022C/MP3022C-OR

3.72 Pints/1.76 Liters

We recommend you use Mopar ATF+4 Automatic Transmission Fluid.

68218057AB

68218057GB

♦ Approximate dry fill or fill to bottom edge of fill plug hole.

CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

 

 

CHASSIS

Description

Capacities

Type

Part Number

Global Part Number

Axles (Front)

210 FBI (Model 44) - Front Axle

2.18 Pints/1.03 Liters

We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85) (API GL-5).

68378949AA

68378949GA

Axles (Rear)

♦♦ 220 RBI (Model 44) Rear Axle – Electronic Locker

3.06 Pints/1.45 Liters

We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85) (API GL-5).

68378949AA

68378949GA

♦/♦♦ 220 RBI (Model 44) Rear Axle – Limited Slip

2.87 Pints/1.36L Liters

We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85) (API GL-5). Models equipped with Trac-Lok Limited Slip Differential require a friction modifier additive.

68378949AA

68378949GA

Chassis Systems

Brake Master Cylinder

N/A

We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.

04318080AD

04318080GD

Clutch Master Cylinder

N/A

We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.

04318080AD

04318080GD

Power Steering Reservoir

N/A

We recommend you use MOPAR Electric Steering Pump Fluid

05154460AA

05154460GA

♦ Limited-Slip Rear Axles require the addition of 70 ml (2.37 oz.) MOPAR® Limited Slip Additive.

♦♦ If equipped with Trailer Tow package use MOPAR® Synthetic Gear Lubricant, SAE 75W-140 (04874469AA)

CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

 

 

 

 

 

MEASUREMENT SPECIFICATIONS



All specifications are given in degrees.


All wheel alignments are to be set at curb height


Front Wheel Alignment Service Measurement Check Specifications

 

Total Toe**

Caster

Cross Caster*

Camber – Left

Camber – Right

Cross Camber*

Sport

0.20° +/- 0.20°

4.65° +/- 1.00°

0.00° +/- 0.50°

-0.25° +/- 0.50°

-0.25° +/- 0.50°

0.00° +/- 0.50°

Rubicon

0.20° +/- 0.20°

4.45° +/- 1.00°

0.00° +/- 0.50°

-0.25° +/- 0.50°

-0.25° +/- 0.50°

0.00° +/- 0.50°

Mojave

0.20° +/- 0.20°

4.48° +/- 1.00°

0.00° +/- 0.50°

-0.25° +/- 0.50°

-0.25° +/- 0.50°

0.00° +/- 0.50°



Caster values required to be greater than or equal to 4.0° for all variants

* Cross Alignment values are determined by taking the left side value minus the right side value.

** TOTAL TOE is the sum of both left and right wheel toe setting. TOTAL TOE must be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. Positive toe is toe-in and negative toe is toe-out.


Rear Wheel Alignment Service Measurement Check Specifications

 

Individual Toe*

Sum Toe*

Thrust Angle

Individual Camber*

Cross Camber*

All

0.15° +/- 0.33°

0.30° +/- 0.33°

0.00° +/- 0.30°

-0.10° +/- 0.65°

0.00° +/- 0.65°

* For reference only. These are non adjustable angles.

 

 

SET-TO SPECIFICATIONS



All specifications are given in degrees.


All wheel alignments are to be set at curb height


Front Wheel Alignment Set-To Specifications

 

Total Toe**

Caster

Cross Caster*

Camber – Left

Camber – Right

Cross Camber*

Sport

0.20° +/- 0.15°

4.65° +/- 1.00°

0.00° +/- 0.50°

-0.25° +/- 0.37°

-0.25° +/- 0.37°

0.00° +/- 0.50°

Rubicon

0.20° +/- 0.15°

4.45° +/- 1.00°

0.00° +/- 0.50°

-0.25° +/- 0.37°

-0.25° +/- 0.37°

0.00° +/- 0.50°

Mojave

0.20° +/- 0.15°

4.48° +/- 1.00°

0.00° +/- 0.50°

-0.25° +/- 0.37°

-0.25° +/- 0.37°

0.00° +/- 0.50°



Caster values required to be greater than or equal to 4.0° for all variants

* Cross Alignment values are determined by taking the left side value minus the right side value.

** TOTAL TOE is the sum of both left and right wheel toe setting. TOTAL TOE must be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. Positive toe is toe-in and negative toe is toe-out.


Rear Wheel Alignment Set-to Specifications

 

Individual Toe*

Sum Toe*

Thrust Angle

Individual Camber*

Cross Camber*

All

0.15° +/- 0.30°

0.30° +/- 0.30°

0.00° +/- 0.30°

-0.10° +/- 0.50°

0.00° +/- 0.50°

* For reference only. These are non adjustable angles.

 

xxx