Wczytuję dane...
Indeks towaru: LX-2023
Realizacja zamówienia: 24

SPECIFICATIONS Chrysler 300C 2023

ENGINE

Description

Type

Capacities

Part Number

Global Part Number

U.S.

Metric

Cooling System

♦ Engine Coolant (3.0L Engine)

We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology).

10 Quarts

9.5 Liters

68163848AB

68163848GB

♦ Engine Coolant (3.6L Engine)

We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology).

10 Quarts

9.5 Liters

68163848AB

68163848GB

♦ Engine Coolant (5.7L Engine without Severe Duty II Cooling System)

We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology).

14.5 Quarts

13.9 Liters

68163848AB

68163848GB

♦ Engine Coolant (5.7L Engine with Severe Duty II Cooling System)

We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology).

15 Quarts

14.3 Liters

68163848AB

68163848GB

♦ Engine Coolant (6.4L Engine)

We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology).

15 Quarts

14.3 Liters

68163848AB

68163848GB

Engine Oil with Filter

Engine Oil (3.0L Engine)

We recommend you use API Certified SAE 5W-20 engine oil, such as MOPAR, Pennzoil, Shell Helix or equivalent meeting the requirements of Material Standard MS-6395 and ACEA A1/B1. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved to Material Standard MS-6395 such as MOPAR, Pennzoil, Shell Helix or equivalent may be used when SAE 5W-20 engine oil is not available.

6 Quarts

5.6 Liters

68218890AB

68218890GB

Engine Oil (3.6L Engine)

We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade.

6 Quarts

5.6 Liters

68218890AB

68218890GB

Engine Oil (3.6L Engine -Export)

We recommend you use API Certified SAE 5W-20 engine oil, such as MOPAR, Pennzoil, Shell Helix or equivalent meeting the requirements of Material Standard MS-6395 and ACEA A1/B1. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved to Material Standard MS-6395 such as MOPAR, Pennzoil, Shell Helix or equivalent may be used when SAE 5W-20 engine oil is not available.

6 Quarts

5.6 Liters

68218890AB

68218890GB

Engine Oil (5.7L Engine)

We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR, Pennzoil, Shell Helix or equivalent. Refer to your engine oil filler cap for correct SAE grade.

7 Quarts

6.6 Liters

68218950AB

68218950GA

Engine Oil (5.7L Engine -Export)

We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR, Pennzoil, Shell Helix or equivalent. Refer to your engine oil filler cap for correct SAE grade.

7 Quarts

6.6 Liters

68218950AB

68218950GA

Engine Oil (6.4L Engine)

Pennzoil UltraTM 0W-40 or equivalent MOPAR® engine oil meeting the requirements of Material Standard MS-12633 for use in all operating temperatures.

7 Quarts

6.6 Liters

68171066PB

68171066GA

Engine Oil Filter (3.6L Engine)

MOPAR® Engine Oil Filter

N/A

N/A

Engine Oil Filter (5.7L and 6.4L Engine)

MOPAR® Engine Oil Filter

N/A

N/A

Fuel (approximate)

Fuel Selection (3.0L/3.6 Engine -Export)

Research Octane Number (RON) 91 Or Higher, 0 – 15% Ethanol.

18.5 Gallons

69.9 Liters

Fuel Selection (3.6L Engine)

87 Octane, 0-15% Ethanol.

18.5 Gallons

69.9 Liters

Fuel Selection (3.6L Engine Flex Fuel E-85)

87 Octane, Up to 85% Ethanol.

18.5 Gallons

69.9 Liters

Fuel Selection (3.6L Engine Flex Fuel E-85 -Export )

Research Octane Number (RON) 91 Or Higher, Up To 85% Ethanol.

18.5 Gallons

69.9 Liters

Fuel Selection ( 5.7L Engine - Automatic Transmission)

89 Octane Recommended – 87 Octane Acceptable, 0-15% Ethanol.

18.5 Gallons

69.9 Liters

Fuel Selection (5.7L Engine - Manual Transmission)

89 Octane Recommended – 87 Octane Acceptable, 0-15% Ethanol.

18.5 Gallons

69.9 Liters

Fuel Selection ( 5.7L Engine -Export)

91 Research Octane Number (RON) Acceptable - 95 Research Octane Number (RON) Recommended, 0 — 10% Ethanol

18.5 Gallons

69.9 Liters

Fuel Selection (6.4L Engine)

91 Octane Only or higher

18.5 Gallons

69.9 Liters

Fuel Selection (6.4L Engine - Export)

Research Octane Number (RON) of 98 or higher.

18.5 Gallons

70 Liters

A/C Refrigerant System

A/C Refrigerant System

R-134a (LHD)

1.75 Pounds

794 Grams

82300101AC

82300101GB

R-134a (RHD)

1.81 Pounds

822 Grams

R-1234yf

1.56 Pounds

709 Grams

68224028AB

68224028GA

♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.

CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description

Type

Gap

U.S.

Metric

Spark Plugs (3.6L Engine)

We recommend you use MOPAR® Spark Plugs.

0.043 in

1.10 mm

Spark Plugs (5.7L Engine)

We recommend you use MOPAR® Spark Plugs.

0.043 in

1.10 mm

Spark Plugs (6.4L Engine)

We recommend you use MOPAR® Spark Plugs.

0.043 in

1.10 mm


TRANSMISSION

Description

Type

Capacities

Part Number

Global Part Number

U.S.

Metric

Automatic

♦ 845RE Overhaul Fill

Use only MOPAR® ZF 8&9 Speed ATF™ Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission.

9.72 Quarts

9.20 Liters

68218925AA

68218925GA

♦ 8HP70 Overhaul Fill

Use only MOPAR® ZF 8&9 Speed ATF™ Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission.

9.0 Quarts

8.50 Liters

68218925AA

68218925GA

♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.

CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description

Type

Capacities

Part Number

Global Part Number

U.S.

Metric

Axles

♦♦175 FIA Front Axle

We recommend you use MOPAR Synthetic Gear Lubricant SAE 75W90 (API GL-5).

0.64 Quarts

0.6 Liters

68218655AA

68218655GA

195 Rear Axle

We recommend you use MOPAR OD Synthetic Gear Lubricant SAE 75W85 (API GL-5).

0.74 Quarts

0.7 Liters

68232947AB

68232947GA

220 Rear Axle

We recommend you use MOPAR OD Synthetic Gear Lubricant SAE 75W85 (API GL-5).

1.16 Quarts

1.1 Liters

68232947AB

68232947GA

230 Rear Axle

We recommend you use MOPAR OD Synthetic Gear Lubricant SAE 75W85 (API GL-5).

1.16 Quarts

1.1 Liters

68232947AB

68232947GA

230 Limited-Slip Rear Axle

We recommend you use MOPAR LSD Synthetic Gear Lubricant SAE 75W85 (API GL-5).

1.16 Quarts

1.1 Liters

68083381AA

68083381GA

Transfer Case

BW 44 – 40

We recommend you use MOPAR® Transfer Case Lubricant for BorgWarner 44 – 40.

2.11 Pints

1.0 Liters

68049954AA

Chassis Systems

Brake Master Cylinder

We recommend you use MOPAR DOT 3 and SAE J1703. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.

N/A

N/A

04318080AD

04318080GC

♦ Power Steering Reservoir (Belt Driven Pump)

MOPAR® Power Steering Fluid +4

N/A

N/A

68218064AB

68218064GB

♦If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (05013457AA), is acceptable.

♦♦ Fluid should be within 3/16” of bottom of fill hole.

CAUTION:

Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.

 

 

DANE DO USTAWIENIA GEOMERTII KÓŁ

 

SET-TO SPECIFICATIONS



All specifications are given in degrees.


All wheel alignments are to be set at curb height 


With service there is both a set-to and service measurement check specifications. Set-to specifications are the parameters and tolerances used when adjusting alignment is necessary. A measurement specification is for the initial measurement of a vehicle in service. If this vehicle does not pass the measurement specification then the alignment should be adjusted to the set-to specification. Measurement specification is due to variation from measurement tools and setting.


Front Wheel Alignment Specifications

 

Total Toe**

Caster – Left

Caster – Right

Cross Caster*

Camber – Left

Camber – Right

Cross Camber*

RWD

0.20° +/- 0.10°

8.00° +/- 1.00°

8.70° +/- 1.00°

-0.70° +/- 0.60°

-0.85° +/- 0.55°

-1.25° +/- 0.55°

0.40° +/- 0.60°

AWD

0.10° +/- 0.10°

5.40° +/- 1.00°

5.40° +/- 1.00°

0.00° +/- 0.60°

-0.15° +/- 0.55°

-0.55° +/- 0.55°

0.40° +/- 0.60°

SRT

0.20° +/- 0.10°

8.30° +/- 1.00°

9.00° +/- 1.00°

-0.70° +/- 0.60°

-0.95° +/- 0.55°

-1.35° +/- 0.55°

0.40° +/- 0.60°

Notes:

* Cross Alignment values are determined by taking the left side value minus the right side value.

** TOTAL TOE is the sum of both left and right wheel toe setting. TOTAL TOE must be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe. Positive toe is toe-in and negative toe is toe-out.


Rear Wheel Alignment Specifications

 

Toe

Sum Toe

Thrust Angle

Camber

Cross Camber

RWD

0.10° +/- 0.15°

0.20° +/- 0.15°

0.00° +/- 0.15°

-1.75° +/- 0.55°

0.00° +/- 0.80°

AWD

0.10° +/- 0.15°

0.20° +/- 0.15°

0.00° +/- 0.15°

-0.50° +/- 0.55°

0.00° +/- 0.80°

SRT

0.10° +/- 0.15°

0.20° +/- 0.15°

0.00° +/- 0.15°

-0.75° +/- 0.55°

0.00° +/- 0.80°

Notes:

* For reference only. These are non adjustable angles.

 

 

 

MEASUREMENT SPECIFICATIONS



All specifications are given in degrees.


All wheel alignments are to be set at curb height


Use service measurement check specifications when doing initial alignment check in service. Service measurement check specifications should be used to determine if the vehicle is out of desired alignment specifications. If a vehicle’s measurements are found to be outside of the service measurement check specifications, then it should be aligned using the set-to specifications. No development testing to be done with service measurement check specifications.

 

 

Front Wheel Alignment Specifications

 

Total Toe**

Caster – Left

Caster – Right

Cross Caster*

Camber – Left

Camber – Right

Cross Camber*

RWD

0.20° +/- 0.20°

8.00° +/- 1.00°

8.70° +/- 1.00°

-0.70° +/- 0.60°

-0.85° +/- 0.55°

-1.25° +/- 0.55°

0.40° +/- 0.55°

AWD

0.10° +/- 0.20°

5.40° +/- 1.00°

5.40° +/- 1.00°

0.00° +/- 0.60°

-0.15° +/- 0.55°

-0.55° +/- 0.55°

0.40° +/- 0.55°

SRT

0.20° +/- 0.20°

8.30° +/- 1.00°

9.00° +/- 1.00°

-0.70° +/- 0.60°

-0.95° +/- 0.73°

-1.35° +/- 0.73°